KG585 All Purpose Liquid Product Info

GOOD TO KNOW

HUMIDITY CURES KRAZY GLUE

Pin in nozzle quickly when you're done to keep it fresh for all your future projects.

OUR STRENGTH IS TESTED ON STEEL

Different materials behave differently, so results will vary.

PLASTICS CAN BE TRICKY

They look similar but are actually very different chemically. We don't recommend this for polyethylene or polypropylene plastics. 

TIPS TO HELP YOU SUCCEED

1. Prep, clean, and dry surfaces. That’s 90% of success.
2. Remove red cap gently. Use pin cap to pierce nozzle.
3. One tiny drop per square inch. (Really.)
   
4. Hold for 10 seconds. Breathe. It’s already done.
5.  Replace pin cap in nozzle. Store tube in case.
   

SAFETY INFORMATION

WARNING: IMMEDIATE BONDING OF THE SKIN, EYES OR MOUTH MAY OCCUR ON CONTACT. MAY BE HARMFUL IF SWALLOWED. EYE IRRITANT. 

CONTAINS: CYANOACRYLATE GLUE

PRECAUTIONS: Avoid ingestion. Keep away from eyes. KEEP OUT OF REACH OF CHILDREN.

FIRST AID TREATMENT

If eye contact occurs, rinse with tap water for 5 - 10 minutes. If irritation persists, seek medical care. If swallowed, get prompt medical attention. If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water.

For further health information contact a poison control center or call CHEMTREC: 1-800-424-9300.

PROMISED FRESH

If you buy this product and it is dried out, we will send you a replacement product.

For full terms and details on this Limited Warranty or to get your replacement item visit us at krazyglue.com/warranty or contact us at the information below.

Mail: 1450 W Main St, West Jefferson, OH 43162
Customer Service: 1-800-338-5192
Email us: hello@krazyproducts.com

Or visit our Contact Us page